LRC3 – Radio filling and overfill prevention system

The LRC 3 is a radio filling and overfill prevention system (optionally with cable solution OP1-4). It is designed for filling stationary and mobile tanks in non-EX areas. The LRC 3 can also be used as a dead man's solution. A liter display on the “LRC 3 Remote" hand-held transmitter is possible, but only in combination with a TWM from Horn-Tecalemit, SAM or Dezidata.

Functions of the LRC3:
Motor (pump) Start / Stop
Filling start / stop
Speed control
Interruption of the filling process
Unwind/rewind hose reel
Switching the auxiliary shaft on/off
Additional freely definable remote control functions
Dead man's mode and emergency stop
Automatic filling stop

SECU-TECH LRC Small: Overfill and underfill prevention system

The LRC Small is a complete wireless filling and overfill prevention system. It is designed for filling stationary and mobile tanks. Overfilling is reliably prevented in conjunction with the limit value transmitter in the tank. The devices are approved for use in both potentially explosive and non-hazardous areas.

SECU-TECH LRC Small
SECU-TECH LRC Small: Overfill and underfill prevention system
Functions:
Motor (pump) start/stop
Filling start/stop/interruption
Speed control
Unwind/rewind hose reel
Dead man's mode
Automatic filling stop

LRC ship: loading/unloading

When a tanker is loaded or unloaded, the system automatically monitors the limit of the tank on shore and the complete unloading process by connecting to the process control system on shore. During the unloading process, the process can be interrupted or stopped from 2 independent locations by using the EX Remote System On shore, the system is permanently connected to the process control system. The system works without a cable connection between ship and shore, thus promoting the safety of the user. The LRC ADN battery case is used to ensure that the battery is not completely discharged during the entire process (up to 36 hours). The system works with all transducers.

Functions:
Motor (pump) start / stop
Filling start / stop
Speed control
Filling interruption and restart
Roll up/unroll hose reel
Dead man's mode
AAutomatic filling stop

LRC ship bunker solution

Many countries require an overfill prevention system for loading ships. This can be implemented with optical sensors, limit value transmitters in accordance with EN13616 or also by means of float switches. The LRC-Small ship bunker system works in combination with all 3 types. (see also: LRC ship: loading/unloading).

>LRC Schiff Bunker Lösung
LRC ship bunker solution
For the following limit value sensors:
Limit value transmitters according to TRbF (PTC thermistor probes - German standard EN13616)
Floating probes (nose to 10 h)
Optical limit value transmitters (Swiss standard, BeNeLux ship standard)
Probes with relay contact

LRC LPG Gas

LRC Small/GAS prevents the overfilling of LPG tanks. It was developed for the loading and unloading process. When the permissible filling quantity is reached, filling is stopped automatically. The driver can also interrupt/restart or stop the filling process immediately if necessary. The LRC Small/GAS can be used as a dead man's system in countries where a limit value sensor in the tank is not prescribed and not available.

Functions of the LRC Gas System:
Engine start / stop
Filling start / stop
Speed control
Filling interruption and restart
Roll up/unroll hose reel
Dead man's mode
Automatic filling stop



INRAG Tanker Truck Systems:
For safety on the road